Interest Calculator — Explanation
How a single investment grows depends on whether credited interest earns further interest. This guide explains the calculation model and connects its assumptions to the result.
Interest Calculator
With simple interest, the capital earning interest stays unchanged. Reinvesting interest increases the base for the next interest period after each credit. The same quoted annual rate can therefore produce different returns depending on when interest is credited.
Explanation
Simple interest — K_end = K × (1 + r × t) — K is the initial capital, r the annual interest rate as a decimal, and t the duration in years. With simple interest, only the initial capital earns interest.
Compound interest — K_end = K × (1 + r/n)^(n × t) — n is the number of compounding periods per year (e.g., 12 for monthly compounding). Interest is added to the capital after each period.
The compound-interest formula describes full interest periods or exponential treatment of partial periods. Additional months can instead use the linear sub-annual method: the capital first grows over the full years, then interest for the remaining months is calculated linearly on that balance. The actual investment contract determines which treatment applies.
Inputs
Initial capital: The amount invested today.
Annual interest rate: The nominal annual interest rate.
Years: Investment period in full years.
Months: Additional months for the investment period (0-11).
Compounding: How often is interest credited?
Compound interest: Interest is added to the capital and earns interest itself.
Sub-annual method: Calculation method for periods under one year.
Examples
The example below uses a single investment with annual reinvestment of interest. The workings show how interest is added to capital. Fees, taxes and additional deposits are excluded.
- Annual interest rate: 5 %
- Initial capital: €10,000.00
- Years: 3
- Months: 0
Final capital: €11,576.25
K_end = K × (1 + r/n)^(n × t)
- r/n = 5 % / 1 = 5 %.
- n × t = 1 × 3 = 3.
- Final capital gross: €10,000.00 × (1 + 0.05)^3 = €11,576.25.
- Interest earned gross: €11,576.25 - €10,000.00 = €1,576.25.
- principal
- 10000
- useCompoundInterest
- true
- mode
- endCapital
- months
- 0
- annualRate
- 5
- compounding
- annual
- subAnnualMethod
- linear
- years
- 3
- considerTax
- false
Interpretation
The nominal annual rate describes the agreed interest rate. With several interest credits during a year, capital starts earning further interest sooner, so the effective annual rate can be higher. Compare final balances only when duration, deposits and costs use the same assumptions.
Limitations and Notes
No account fees considered: The calculator does not account for custody fees, account management fees, or transaction costs that reduce the actual yield.
Constant interest rate over the entire term: The calculation assumes an unchanged interest rate. With variable investments (savings accounts), the rate can change at any time.
Simplified tax calculation: Church tax, loss offsetting, and the more favourable assessment rule are not considered. Actual tax liability may differ.
Confusing nominal rate with effective rate: Always use the effective rate for comparisons and consider the compounding frequency.
Sources and References
Section 246 of the German Civil Code sets statutory interest for interest-bearing debts unless otherwise provided. It neither sets the agreed savings rate nor establishes the mathematical compound-interest formula.
Section 248 of the German Civil Code addresses legal limits on advance agreements for compound interest and exceptions for certain savings deposits. The actual contract determines interest credits and reinvestment; a model assumption alone proves no entitlement.
Section 20 of the German Income Tax Act classifies interest as investment income; section 32d governs its separate tax tariff, with exceptions. These provisions supply tax context and do not guarantee the calculator's simplified net result.
The base rate published by the Bundesbank under section 247 of the German Civil Code is a statutory reference, for example for default interest. It is no market savings rate and does not substantiate the assumed investment rate or calculated return.
Compare investments over the same duration and with the same reinvestment assumptions. Then check costs, taxes and possible rate changes separately: the final balance describes the selected model and does not promise an actual investment return.